44 courses in the 1963–64 Undergraduate Calendar, read from the scanned original. The text comes from OCR, so check the scanned page before relying on a detail.
D. T. Wright, B.A.Sc. (Toronto), M.S. (Illinois), Ph.D. (Cambridge) Professor and Chairman of the Department, Dean of the Faculty of Engineering
S. T. Ariaratnam, B.Sc., B.Sc. (Eng.) (Ceylon), M.Sc. (London), Ph.D. (Cambridge) Associate Professor
N. C. Lind, M.Sc. (Royal Technical University of Denmark), Ph.D. (Illinois) Associate Professor
A. N. Sherbourne, B.Sc. (London), M.S. (Lehigh), M.A., Ph.D. (Cambridge) Associate Professor
W. R. Drynan, B.A.Sc. (Toronto), M.S., Ph.D. (Texas) - - - Assistant Professor C. P. Fisher, M.A.Sc. (Toronto), O.L.S. Assistant Professor W. A. McLaughlin, B.Eng. (Saskatchewan), M.S. (Purdue) - Assistant Professor H. B. Poorooshasb, B.Sc. (Manchester), Ph.D. (Cambridge) - - Assistant Professor
J. D. Scott, B.Sc. (Queen’s), M.S. (Illinois) - - - - Assistant Professor A. T. Cairncross, B.Sc. (Queen’s) - - - - - - - Lecturer R. Green, B.Sc. (Eng.) (London), M.Sc. (Queen’s), M.Sc. (Waterloo) - Lecturer V. K. Handa, B.Sc. (Calcutta), B.Sc. (Eng.) (London), M.Sc. (Queen’s), M.Sc. (Water-
loo) - - - . - - - - - - - - Lecturer B. G. Hutchinson, B.E. (Sydney), M.Sc. (Queen’s) - - - - Lecturer P. H. Meincke, B.Sc. (Manitoba) - - - - - - - Lecturer T. H. Topper, B.A.Sc. (Toronto), Ph.D. (Cambridge) - - - Lecturer
O. L. White, B.Sc. (Melbourne), M.A.Sc. (Toronto) - - Lecturer (on leave of absence)
The course is designed to teach manipulation of drawing instruments and to develop manual drafting skills. Problems include orthographic, axonometric, oblique, isometric, and perspective methods of graphic presentation.
4 hours, one term.
This course supplements the course in Engineering Graphics I with furrher instruction in graphical methods. Graphical methods for solving problems involving vector quantities. The design, construction, and use of graphs and special charts, with various applications. The use of specially graduated scales, and the design of slide rules and nomograms. Graphical and mechanical methods of integration. Prerequisite: CE 11.
4 hours, one term.
Review of statics. An analytical treatment of the resistance of materials, commencing with definitions of strains, stress, and properties of idealized materials. Mohr’s circle for stresses. Elastic and plastic behaviour of members subjected to axial, shearing, torsional and flexural deformations. Columns, statically indeterminate systems, and combined stresses are also treated.
3 lectures, 2 hours problems, one term.
A general treatment of the behaviour of structural components from the study of stress and strain in solids. Topics include Mohr’s circle for strains and moments of inertia. Superposition, Castigliano’s theorem, theories of failure, elastic and inelastic analysis of unsymmetrica! bending, torsion, and columns. Curved beams, beam on elastic foundation, shear centre and torsion of cellular members. Various topics in theory of plasticity, limit analysis and elastic stability. Applications of numerical analysis.
Prerequisite: CE 22.
2 lectures, one term.
31. : Theory of Structures I. Analysis of simple determinate structures. Static and moving loads on beams and trusses. Conditions for statical determinacy. Deformation of trusses. Influence lines.
Prerequisite: CE 21.
2 lectures, 3 hours laboratory, alternate weeks, one term.
Elastic and plastic analysis of indeterminate plane structures. Analysis of space structures. Methods of virtual work, slope deflection, moment distribution, and matrix analysis.
Prerequisite: CE 31.
3 lectures, 3 hours laboratory, alternate weeks, one term.
Introduction to design, risk and the uncertainty in loads and material strength properties. The problem of rational design, Development of codes and specifications. Principles of elastic and limit design. Behaviour, analysis and design of structural elements in metal. Beams, tension and compression members, connections and plates. Design of simple structures. Experimental studies of structures.
Prerequisites: CE 22, 32.
3 lectures, 3 hours problems or laboratory, one term.
Physical and chemical properties of cements, water, and admixtures; design of concrete mixes, workability, strength, and durability; field procedures and control; laboratory work on test procedures and concrete technology. Behaviour, analysis and design of structural elements; beams, tension and compression members, design of simple structures; experimental studies of structures.
Prerequisites: CE 31, 51.
3 lectures, 3 hours problems or laboratory, one term.
Loads, safety, and rational design criteria relating to structural design, structural form and structural action. Economic proportions. Behaviour of integral structures and consideration of failure in real and ideal structures. Application to design.
Prerequisites: CE 33, 34.
2 lectures, 1 seminar, one term.
Plane surveying with tape, transit, level, and compass. Field practice and applications. Corrections and adjustments. Computation of azimuths, errors, areas. and earth-work. Mapping. Horizontal and vertical curves, topographic surveying and mapping. Land surveying field astronomy, precise traverse and levelling.
3 lectures, 6 hours field work, one term.
Advanced topics in surveying and photogrammetry. Aerial triangulation. theory of stereoplotters, stereotopographic mapping, application of photogrammetry other than from aerial photographs.
Prerequisite: CE 41.
3 lectures, one term.
An introductory course in geology, with emphasis on topics particularly related to civil engineering; mineralogy (particularly clay mincralogy), petrology, aggregates, structural geology, geomorphology (especially glacial geology), and ground water. Laboratory work will include the identification of minerals and rocks and the study of the use of geological maps for engineering purposes. Weather permitting, field trips may be undertaken in addition to the laboratory sessions.
3 lectures, 3 hours laboratory alternate weeks, one term.
Identification and classification of soils, index properties, capillarity and permeability, frost action, compaction, compressibility and consolidation, stress distribution, shear strength, pore pressure perameters, character of natural soil deposits, subsurface exploration and sampling, case histories. The lecture course is supplemented by a series of laboratory experiments on the techniques and interpretation of soil tests.
Prerequisite: CE 51.
3 lectures, 3 hours laboratory, one term.
Soil investigation and surveys, shear strength-time relationships, flow nets, slope stability, earth dams, earth pressure theories, earth retaining structures, bearing capacity theories, bearing capacity and settlement with relation to shallow and deep foundations.
3 lectures, one term.
The planning, economics, finance, location, and design of transportation facilities. Highway and airport pavements, loads and stress distribution, soil strength, soil stabilization, drainage, behaviour and design of flexible and rigid pavements. The lecture course is supplemented by laboratory experiments on highway materials.
Prerequisite: CE 52.
3 lectures, 3 laboratory, alternate weeks, one term.
Principles of highway location. Geometric design of highways and intersections. Traffic, maintenance and operations.
Prerequisite: CE 61.
3 lectures, one term.
General introduction to the physical, chemical and biological bases of water treatment and waste water treatment and disposal. Principles of design and construction of facilities for the collection, treatment, and distribution of water, and the collection, treatment, and disposal of waste waters. The lecture course is supplemented by a series of laboratory experiments related to water quality measurement and process control.
3 lectures, 3¢hours laboratory, one term.
An introductory course to the engineering principles which form the basis of environmental sanitation. Environmental health problems of the community and of industry are considered, including water, food, and air supplies, disposal of human and industrial wastes, animal and arthropod vectors, lighting, ventilation, noise, accidents, industrial poisons, and ionizing radiations. Prerequisite: CE 71.
3 lectures, one term.
Engineering law. The design and composition of contracts and specifications. 2 lectures, one term.
Urban and regional planning. The contro! and administration of land use for various purposes. Problems of regional planning and urban growth related to communications, etc.
Prerequisite: CE 61.
3 lectures, one term.
Separation of planning and scheduling functions, traditional methods, arrow diagramming, calculation of earliest and latest event times, design, delivery, and capital restraints, critical path determination, scheduling and calendar dating, the data flow cycle, linear progiamming and operational analyses. 3 lectures, one term.
84, Civil Engineering Design Studies I. Design of civil engineering projects, building structures, bridges, highway and municipal engineering works. Emphasis is given to the interrelationship between design synthesis, and the various sciences and disciplines covered in the undergraduate course of studies.
6 hours, one term.
Introduction to research problems and procedures, in various areas of civil engineering, with particular relation to special interests in optional programmes of students concerned.
9 hours, one term.
Iterative methods in structural analysis. Advanced problems in stability of frames, trusses, and their components. Dynamic loadings and shock effects. Vibrations.
one term.
Simple plastic theory and limit design of plane frames, plates, and space structures. Deflections. Shakedown. Inelastic instability and the influence of strain hardening. Dynamic loading.
one term.
Complex variables and three-dimensional problems in spherical and cylindrical co-ordinates. Thermal stresses. Dynamics of elastic continua. Large deflection problems, Fundamental theorems of plasticity and limit analysis. Slip-line fields.
one term.
Classification and estimation of errors. Smoothing of experimental data. Similitude and model laws. Simulation of frames, trusses, plates, and shells. Analogue methods in experimental stress analysis. Electrical and mechanical strain gauges, transducers. Brittle coatings. Photoelasticity.
one term.
Calculus of finite differences. Applications to moments and deflections of beams. Problems of elastic stability. Beams on elastic foundation. Energy methods. Rayleigh-Ritz and Galerkin procedures. Solution of systems of linear algebraic equations by relaxation and the Crout method. Applications to statically indeterminate systems. Bending of plates.
one term.
A unified introduction to the mechanics of solids and fluids. Stress, deformation and flow. Materials and their rheological properties. The equations of elastic solids. Problems in linear elasticity. Equations of fluid mechanics. Problems in viscous and ideal fluid flow. Introduction to the analysis of shells. Problems in plasticity and theoretical soil mechanics. Application to geophysics.
one term.
Differential geometry of surfaces. Equations of equilibrium and deformation in orthogonal curvilinear co-ordinates, Momentless theory of shells. Energy formulations and stability problems in shells. Limit analysis of plates and shells.
one term.
Highway Planning—method and results; classification, needs, sufficiency ratings; economics of location; highway finance; highway administration; geometric design of roads and streets—principles and methods.
one term.
Basic characteristics of traffic, drivers, vehicles, volumes, speeds, delays, etc.; traffic studies; capacity determinations; traffic theory including interrelationships of land use and traffic; mathematical models.
one term.
Basic urban transportation studies including origin/destination, inventory, use, parking and transit studies; land use planning, travel desires; economics in urban transportation.
one term.
Theories of elasticity and plasticity applied to soils. Advanced studies of research techniques in soil mechanics and foundation engineering. one term.
Laboratory and field work in soil sampling and testing. Measurement of soil mechanics parameters for design and research problems. Experiments include permeability, consolidation, direct shear, and triaxial shear.
one term.
A critical study by the consideration of case histories of the current procedures for design and construction of foundations, earth retaining structures and earth slopes.
one term.
Use of geologic and pedologic information and airphoto interpretation principles and techniques in the prediction of eningeering properties of soils and the planning of engineering soil surveys.
one term.
Water Supply and Treatment. The unit operations involved in the treatment of water for domestic and industrial uses.
one term.
Waste-Water Treatment and Disposal. The physical, chemical, and biological processes utilized in the treatment of domestic and industrial waste-waters.
one term.
Advanced Laboratory-Water Quality Measurement and Process Control. A series of laboratory experiments on the various unit processes of water and waSte-water treatment. Stream pollution Investigations. one term.
Design and Operation of Water and Waste- Water Treatment Facilities. Practical design of the unit processes of water and wastewater treatment facilities. Design of a complete treatment facility. Operating problems in water and waste-water treatment plants and their elimination or minimization through proper design.
one term.
The principles of the field of air pollution; health, nuisance, agricultural, etc., aspects; causes and sources; characteristic emission rates, gas flow in ducts and chimneys; physical properties of particulate matter; engineering design of air cleaning equipment; public relations, control ordinances, and zoning; public administration.
one term.
Engineering problems in refuse collection and disposal, sanitation to suburbs, foods and milk sanitation, housing, industrial hygiene, and other environmental sanitation programmes.
one term.
one term.